Gate accessory pack

Cable ducting: If it is not possible to submerse the motor supply cable between the gate posts, then cable ducting is required. It will protect the supply cable between the gate posts and withstand vehicles driving over it.

Gate travel stops: Gate stops are required to allow gate operator systems to automatically memorise the gate leaf open/close distances during the commissioning phase. Simply anchor the gate stoppers in the ground at the appropriate location to provide the stopping distance as the gate moves through an open/close cycle.

Gate accessory pack

Cable ducting: A convenient solution where it is impractical to submerse the supply cable between the gate posts or disruption to the existing driveway is not desired. The cable ducting provides a quick and simple solution to install the gate opener supply cable between the gate posts and provide the required protection from vehicles.

Gate travel stops: Simple solution to provide the gate with a mechanical stop. Durable material to withstand all weather conditions.

Gate accessory pack

Cable ducting: 4M length of cable ducting + screws and plugs.

Gate travel stops: 2 x gate stops, 4 x anchor bolts + washers.

Gate accessory pack

• SGS 201
• SGS 501
• SGA 5000
• SLD 3000