My basket
GDT 200 installation
Preliminary checks:
The door opens and closes normally by hand, without excessive force, over the entire opening and closing cycle.
The door opens and closes normally by hand, without excessive force, over the entire opening and closing cycle.
If your door is balanced with a counterweight, make sure that the weight is evenly distributed.
The motor can be secured to the structure of your garage (walls, lintel, joists, door rails, etc.). Reinforce them if necessary.
There is adequate ceiling clearance over a minimum length of 2.75 m for the GDT 200.
The height under the lintel and the distance between the highest point of the door at maximum opening and the garage ceiling is at least 5.5cm for the GDT 200.
If your door is the only access point into your garage, then an exterior unlocking device is required in the event of a power cut. Select the external de-clutching kit or the external key lock to allow manual operation of your door in the event of a power cut.
Electrical requirements
230 V power supply outlet close to the GDT 200 motor head.
